I recently installed FPSEce v0.10 on my palm treo 750v which is running windows mobile pro 6 (5.2.1239).

The problem I'm having is that whenever I try and run fpsece v0.10 the screen goes all blank and then reappears again.

Does anyone have any suggestions on how to fix the problems I am experiencing or even tell me if fpsece v0.10 is compatible with my model of phone?

many thanks

Have you tried all Graphics versions? GFXDRV= (0 to 4)

Only tried with it set to 0 so will try the others, thanks.

Tried it set on 3 and 4, now I get fpsece free version across the top of the screen in a black box. This was while trying to running Gex from the loader menu.

Any ideas?

Thanks

ok, with GFXDRV set to 0 or 1 it loads but then disappears. If set to 2, 3 or 4 it just leaves a black strip across the top of the screen with "fpsece free version" written within it.

After turning off both the below it loads but then crashes:

ArmCoreV5=off
ArmCoreMMX=off

So I think my problem may be related to this:
http://www.fpsece.net/forum2/viewtopic.php?f=7&t=296&sid=da1c858df8f72bee4f46bd4137a61baf

Unfortunately I think you might be correct. Samsung processors don't like to work with FpseCE at this time. Hopefully they can get it working before long.