Page 1 of 1

FPSE and BT Controller, 2ND KEY MAPPING IS TROUBLE !

Posted: Mon Aug 06, 2012 1:39 pm
by richardyusan
i have bt controller pro and fpse registered version in my HH.
i assign hw key for 2nd player (GAMEPAD > ASSIGN HW BUTTON > PAD 2) through bt controller (2nd controller is my friend handheld)
everything fine...

but,
in game, my hw key is same as my friend hh,
this cause if my friend touch UP key, both player 1 & 2 involved pressing the UP
so the controller is very mad :roll:

well, do you have any succesfull experience using BT Controller for 2nd controller for FPSE ? please tell me

for the developer please make BT Controller section to easily setting key. in GAMEPAD > bluetooth, there is only Icontrolpad, Bgm100 :(

please reply.

BT Controller by DroidBean (Lite version is avaible too)
https://play.google.com/store/apps/details?id=droidbean.btcontrollerfull

Re: FPSE and BT Controller, 2ND KEY MAPPING IS TROUBLE !

Posted: Sun Aug 12, 2012 5:25 am
by bluezeak
I didn't see this post until just now, sorry about that.

To use this software, you should NOT use the Bluetooth options in FPSE. Turn Bluetooth in the control pad settings off in FPSE off. Then restart fpse. Then go to menu, gamepad, assign hw Buttons, and setup the buttons a you want. I recommend not using analog, and that you set both 'Bluetooth controller' to be in digital mode. In FPSE make sure they're both set to digital.

Re: FPSE and BT Controller, 2ND KEY MAPPING IS TROUBLE !

Posted: Tue Aug 14, 2012 10:35 pm
by schtruck
use bluez ime, then set wihin bluez interface that you want 2 pads. now just sync your pad and map them to keys.

after you can just run fpse. it will connect to pad automatically via bluez
.

Re: FPSE and BT Controller, 2ND KEY MAPPING IS TROUBLE !

Posted: Fri Oct 05, 2012 4:59 am
by richardyusan
schtruck wrote:use bluez ime, then set wihin bluez interface that you want 2 pads. now just sync your pad and map them to keys.

after you can just run fpse. it will connect to pad automatically via bluez
.


More detailed instructions please

Re: FPSE and BT Controller, 2ND KEY MAPPING IS TROUBLE !

Posted: Sun Oct 07, 2012 1:05 am
by bluezeak
1 install bluez ime.
2 go to config setup for bluez ime
2a see help for bluez ime for more info
2b make sure you configure bluez to use 2 controllers
2c set mappings for controllers in bluez settings
3 in FPSE, map hardware keys for gamepad from menu, settings, gamepad mapping.
4 enjoy

You should know that some Android ROMs don't allow bluez to work with emulators. Mine is offer of them, a stock motorola bionic ROM. If you have s motorola device you may have this problem.