Fpse for Android Discussion/Feedback

sebasss
Junior Member
Posts: 15
Joined: Sat Jan 21, 2012 6:07 am
Primary Device: xperia arc
Operating System: android
ROM: stock

Re: Fpse for Android Discussion/Feedback

Postby sebasss » Wed Jun 20, 2012 5:08 am

so you are getting 15 frames because you are using opengl mode... dont waste your time... the gpu adreno 200 could never get 60 fps in HWM(hardwaremode)... plus, a direct rendering of a 320 screen is useless, the native resolution of psx games is that, so using HWM over SWM(softwaremode) is bad cause are you stresing the ram, the cpu and the gpu to get the same quality

the games i use... CTR, but for some reason is not working anymore...crash 3, metal gear, shaman king, final fantasy vii, and digimon world II and all runs very smooth in my ace and arc in SWM

BTW some can tell me if the .27 update is in the market... for some reason the update dont show to me

User avatar
icelaglace
Member
Posts: 51
Joined: Tue Jun 19, 2012 7:29 am
Primary Device: ACEi (GT-S5830i)
Operating System: 2.3.6
ROM: XXLH3

Re: Fpse for Android Discussion/Feedback

Postby icelaglace » Wed Jun 20, 2012 9:19 am

No, again no, obviously I DON'T use OpenGL mode.

To run in software mode is UNsetting "Hardware acceleration" option? because I tried to set and unset "enhanced 3d rendering", "hardware acceleration", "boost mode", "force monocore" options and I have the same performance anyways...

I think this mod should have a "demo" or "trial" version to check performance before pursache instead of say this is very "fast" :cry:



==============================

Here Ace GT-S5830i specs if it can help:

Screen: TFT, 320 x 480 pixels, 3.5 inches (~165 ppi pixel density)
CPU: 832 MHz
GPU: Adreno 200
HSDPA, 7.2 Mbps
RAM: 290MB
ROM: GB v2.3.6
Broadcom VideoCore IV (1080p capable) on Samsung Galaxy Ace "i"(only i/c/m models), Samsung Galaxy Y, Huayu T968 and Alcatel OT979 3G WCDMA (adding support...)

fanta2go
Junior Member
Posts: 7
Joined: Mon Apr 23, 2012 12:14 pm
Primary Device: Samsung Galaxy Note

Re: Fpse for Android Discussion/Feedback

Postby fanta2go » Wed Jun 20, 2012 12:03 pm

Im so happy that the mali gpu is fixed for my samsung galaxy note.

Now i hope the framerate is not to bad :).

With Opel GL looks the games a lot of better and make more fun :D!

User avatar
icelaglace
Member
Posts: 51
Joined: Tue Jun 19, 2012 7:29 am
Primary Device: ACEi (GT-S5830i)
Operating System: 2.3.6
ROM: XXLH3

Re: Fpse for Android Discussion/Feedback

Postby icelaglace » Wed Jun 20, 2012 5:37 pm

I'll be flash my phone (to install a deodexed rom) and I want make a backup of my savegames, where de location of savegames files? only savegames, not the settings and stuff
Broadcom VideoCore IV (1080p capable) on Samsung Galaxy Ace "i"(only i/c/m models), Samsung Galaxy Y, Huayu T968 and Alcatel OT979 3G WCDMA (adding support...)

sebasss
Junior Member
Posts: 15
Joined: Sat Jan 21, 2012 6:07 am
Primary Device: xperia arc
Operating System: android
ROM: stock

Re: Fpse for Android Discussion/Feedback

Postby sebasss » Wed Jun 20, 2012 5:53 pm

icelaglace wrote:No, again no, obviously I DON'T use OpenGL mode.

To run in software mode is UNsetting "Hardware acceleration" option? because I tried to set and unset "enhanced 3d rendering", "hardware acceleration", "boost mode", "force monocore" options and I have the same performance anyways...

I think this mod should have a "demo" or "trial" version to check performance before pursache instead of say this is very "fast" :cry:



==============================

Here Ace GT-S5830i specs if it can help:

Screen: TFT, 320 x 480 pixels, 3.5 inches (~165 ppi pixel density)
CPU: 832 MHz
GPU: Adreno 200
HSDPA, 7.2 Mbps
RAM: 290MB
ROM: GB v2.3.6


NOPE, hardware acceleration is another thing diferent to hardware mode, the hardaware mode gets enable with the command "dowload opengl plugin"... is really really weird you have that performance... maybe so much backgroud process... welll we dont lose nothingm why dont you try the opengl plugin and see what are the reults with it

and tell me what is your performance... how many frames you get

User avatar
icelaglace
Member
Posts: 51
Joined: Tue Jun 19, 2012 7:29 am
Primary Device: ACEi (GT-S5830i)
Operating System: 2.3.6
ROM: XXLH3

Re: Fpse for Android Discussion/Feedback

Postby icelaglace » Wed Jun 20, 2012 7:52 pm

sebasss wrote:NOPE, hardware acceleration is another thing diferent to hardware mode, the hardaware mode gets enable with the command "dowload opengl plugin"... is really really weird you have that performance... maybe so much backgroud process... welll we dont lose nothingm why dont you try the opengl plugin and see what are the reults with it

and tell me what is your performance... how many frames you get

Oh I see, thanks for explanation.

I have not other process in background, I try to reboot and clear memory in task manger (this close all subprocess) and then I run FPse.

Every other programs run OK, HD videos, HR pics, etc.. I use Adrenaline Engine (http://forum.xda-developers.com/showthr ... ?t=1579710) and the content from sdcard is charge very fast, I mean heavy files, or huge pdf's with a lot of pics and stuff I can move it really fast, is only FPse (but I only try with FPse, no other games)

I will not put OpenGL mode again because the last time I tried it I had to uninstalling and reinstalling FPse to return to software mode because it was really unplayable... I can't tell you how much fps but really unplayable...

With software mode (non-opengl) on Crash Bandicoot I get 20-35 fps aprox, in menu if I'm not moving I get 40fps. Actually only have crash bandicoot 3, metal gear solid and driver 2 with same performance too, maybe with other games like metal slug or worms for example I can have more fps but I not check these games yet :/
Broadcom VideoCore IV (1080p capable) on Samsung Galaxy Ace "i"(only i/c/m models), Samsung Galaxy Y, Huayu T968 and Alcatel OT979 3G WCDMA (adding support...)

User avatar
i900frenchaddict
Global Moderator
Posts: 1355
Joined: Sat Feb 21, 2009 10:47 am
Primary Device: Galaxy Note 4
Location: France
Contact:

Re: Fpse for Android Discussion/Feedback

Postby i900frenchaddict » Wed Jun 20, 2012 8:27 pm

does it make a difference if you DON'T display any onscreen controls (I know, impossible to play then, just to see)

User avatar
icelaglace
Member
Posts: 51
Joined: Tue Jun 19, 2012 7:29 am
Primary Device: ACEi (GT-S5830i)
Operating System: 2.3.6
ROM: XXLH3

Re: Fpse for Android Discussion/Feedback

Postby icelaglace » Wed Jun 20, 2012 8:59 pm

i900frenchaddict wrote:does it make a difference if you DON'T display any onscreen controls (I know, impossible to play then, just to see)

With "unset buttons" option? ok, just tried and no difference in crash bandicoot 3 (I remember the buttons possition don't worry :mrgreen:)

Edit:
Tried on MGS too and same fps rate with/without pad
Broadcom VideoCore IV (1080p capable) on Samsung Galaxy Ace "i"(only i/c/m models), Samsung Galaxy Y, Huayu T968 and Alcatel OT979 3G WCDMA (adding support...)

gamerguy80
Member
Posts: 56
Joined: Tue May 10, 2011 4:58 pm
Primary Device: Google Nexus 5
Operating System: Android KitKat 4.4.4
ROM: Stock

Re: Fpse for Android Discussion/Feedback

Postby gamerguy80 » Wed Jun 20, 2012 9:57 pm

so will the new release be coming soon or is it in testing phase at the moment?

User avatar
icelaglace
Member
Posts: 51
Joined: Tue Jun 19, 2012 7:29 am
Primary Device: ACEi (GT-S5830i)
Operating System: 2.3.6
ROM: XXLH3

Re: Fpse for Android Discussion/Feedback

Postby icelaglace » Thu Jun 21, 2012 11:11 am

FIXED!!!
I set frameskip up to 50 and I get 38-48fps with Crash Bandicoot 3... is not really fixed but at least now I have a better gameplay... finally :D


Edit:
Sorry for ask again, but anybody can tell me how to make a backup of my savegames please?
Broadcom VideoCore IV (1080p capable) on Samsung Galaxy Ace "i"(only i/c/m models), Samsung Galaxy Y, Huayu T968 and Alcatel OT979 3G WCDMA (adding support...)


Return to “News”

Who is online

Users browsing this forum: No registered users and 1 guest

cron